Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger
Produtos Similares a Considerar
Resolution:.0001" (0.001 mm)
Calibrate to known thickness or Select Material from 8 Presets
5-Year Warranty, Made in USA
Datalogging:Built-in datalogging for 10,000 data values, USB Output
Range with Standard Delay Line Transducer
0.0060" - 1.000" / 0.150 - 25.40 mm
Range with Contact Transducers
up to 36.00" / 915.0 mm
The Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger is a precision ultrasonic wall thickness gauge designed for high-resolution measurements on thin-wall metal and plastics. It is packaged in a sturdy extruded aluminum housing which is sealed for excellent environmental protection assuring trouble-free use even in the toughest field and production environments.
The built-in datalogger has a capacity of 10,000 data values stored in up to 40 batches with 250 values/batch which is transferred via the USB port using the supplied cable. The PZX-7DL does not require any software, it will be shown as a drive when connected to a PC allowing convenient drag-n-drop into your program of choice. Data is saved in a comma deliminated file format (.csv) which makes it compatible with all programs and software.
The PZX-7DL has measuring range in steel from 0.0060 to 1.0000 inch, (0.15 to 25.40 mm). Using a single element delay tip transducer, the gauges will measure thin materials and automatically remove any coatings in Echo-Echo Mode (E-E) as well as automatically switch to Interface Echo Mode (I-E)when measuring thicker materials, For measurement of plastics, the user would select Plastic Mode (PLAS) and use the option Graphite Delay Line Tip (p/n X-633-0000).
Additional Measuring Modes include Differential (DIFF) where a user sets a "nominal value" and the gauge displays the difference between then nominal and actual wall thickness, Alarm (user-set Hi/Low Limits) trigger Hi/Lo LED's when the measured values are out of tolerance and Velocity Mode
The PZX-7DL can also be used with single element contact transducers for wall thickness measurements up to 36 inches (923 mm).
Kit Contents
- Dakota Ultrasonics PZX1-DL (PZX-7DL) Data-Logging Precision Ultrasonic Wall Thickness Gauge Z-308-0001 / Z-308-0002 with T-402-5507 Probe with Built-in Datalogger With T-402-5507 Probe With Built-In Datalogger
- 4 oz. bottle of coupling fluid
- USB-C Data transfer cable
- 2 AA batteries
- NIST Traceable Calibration Certificate
- Carrying case
- Instruction Manual
Features
- Large, backlit LCD display retains last reading
- Resolution of 0.0001 inch (0.001 mm) with Selectable units of inch or mm
- Includes NIST Traceable Calibration Certificate
- IP 65 Rated for protection even in the toughest field conditions
- 5 Year Warranty, CE-Certified and Made in USA
- Scan mode, 100 readings/sec. Probe is slid over a large measuring area, the minimum thickness during the "scan" will be displayed
- Adjustable GAIN (AGC) in 5 steps to fine tune the gauge for use on challenging materials or applications
- Can be used with both Single Element Delay Line and contact transducers (5 to 20MHz)
- LCD shows Thickness Value, Velocity Setting, Gain Setting, Stability & Battery Indicators, Scan Mode, Zero and units
- Operates on two (2) AA Batteries - 45 hours continuous operation
- Calibrate to a sample of known thickness which automatically calculates the optimal acoustic velocity
- Built-in datalogging for 10,000 data values stored in up to 40 batches with 250 values/batch with USB Output
- Powered by: 120MHz FPGA timing & 100 volt spike pulser
- Measure Modes: Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS)
- Optional serial RS-232 or Bluetooth output
- Additional Modes Include Differential (from user-entered "nominal value"), Alarm (user-set Hi/Low Limits) and Velocity Mode
Specifications
| Range with Standard Probe | 0.0060-1.0000" (0.15-25.40 mm) with standard delay line transducer in steel |
| Resolution | 0.0001" (0.001 mm) . 0.001" (0.01 mm), user-selected units and resolution |
| Display | Multi-function 7 segment 4.5 digit liquid crystal display with Back-light |
| Velocity Range | 0.0120 to .7300 in/s (305 to 18,542 m/sec) |
| Display Backlight | Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options |
| Output Optional | RS-232 and Bluetooth |
| Cable | 4 ft. (1.2 m) with Microdot/Lemo00 connector. |
| Output | USB single value only (no internal memory)TI-007DLXfor a model with build-in memory for 40,000 values USB output |
| Operating Temperature | -22 to 167F (-30 to 75C) |
| Housing Protection | IP65 |
| Battery Life | Typically operates for 35 hours on alkaline and 18 hours on NiCad |
| Weight | 11 ounces (308 grams) |
| Dimensions | 2.5 x 5.17 x 1.25" (64 x 131 x 32 mm) |
| Warranty | Gauge: 5 Years Probes: 90 Days |
| Total Measuring Range (Steel) | 0.006 - 36.000 inches 0.15 - 924 mm (depends on material and transducer/probe type) |
| Measuring Modes | Pulse-Echo (P-E), Echo-Echo (E-E), Interface Echo (I-E) and Plastics (PLAS), Differential, Alarm, Scan and Velocity (VX) |
| Gain | Automatic time dependent gain (TDG) with manual override |
| Probe (Standard) | 1/4" diameter, 15 MHz delay line transducer with cable (p/n T-402-5507) |
| Probes (optional) | Various Single Element Delay Line and Contact Transducers (5 to 20MHz) |
| Display Update Rate | 10 Hz (10 updates/sec) |
| Battery Type | 2x AA 1.5V alkaline, 1.2V NiCad, or 1.5V lithium AA cells (rechargeable batteries can be used) |
| Housing | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Certifications | NIST Traceable and MIL-STD-45662A |
| Keypad | Sealed membrane that is resistant to both water and petroleum products Seven or eight tactile-feedback keys |
| Pulse Repetition Frequency (PRF) | 200 Hz (200 pulses/sec) |
| To Lock Settings | With gauge powered off, press and hold the "+" key while powering on the gauge The LOCK icon will be illuminated on the Display |
| To unLock Settings | With gauge powered off, press and hold the "-" key while powering on the gauge The LOCK icon will turn off |
Delay Line Tips for PZX-7DL
| P/N | Description | Standard / Optional | Image |
| X-231-0000 | 1/4" x 3/8" for all metals (Short) | Standard |  |
| X-241-0000 | 1/4" x 1/2" for all metals (Long) | Standard |  |
| X-633-0000 | 1/4" x 3/8" Graphite Tip for thin plastics (Graphite Short) | OPTIONAL |  |
Related Products
NIST-Traceable Steel Test Block
3 Sizes Available
- Precision Machined and Finished
- Includes NIST Report and Test Data
TICC-M
Protective Holder for Ultrasonic Gauges
- Constructed from heavy duty Cordura Nylon
- Built-in belt loop
For Ultrasonic Gauges
- For convenient confirmation of thickness gauge calibration
50 Foot Underwater Probe / Cable Assembly
- 50 Ft. Length, Waterproof Probe/Cable assembly with non-polarized, Dual-Lemo connectors
Transducer Holder
- The V-Block transducer holder offers the operator greater control and repeatabily when measuring on pipes and other curved areas
Downloads
 | Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - Instruction Manual (NEW MODEL) |
| PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Data Sheet |
| PZX-7DL Data-Logging Precision Ultrasonic Wall Thickness Gauge with USB Output - Instruction Manual (OLD MODEL) |
| Dakota Ultrasonics Single Element Precision Thickness Gauges Transducers Accessories - List |
