Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display
$2,850.00
Loading...
Loading product info...
Similar Products to Consider
Product Description
Range: 0.025 - 19.999 inches - 0.60 - 254.0 mm
Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display with Enhanced graphic scope Displays A Scan & B Scan for a cross section view
Resolution:.001" (0.01 mm)
Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display with Enhanced graphic scope Displays A Scan & B Scan for a cross section view
Resolution:.001" (0.01 mm)
The Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures.
The Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. It is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate.
Kit Contents
- Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display With T-102-2700 Probe
- 4 oz. bottle of coupling fluid
- 2 AA batteries
- NIST Traceable Calibration Certificate
- Data Transfer Software
- Serial Output
- Carrying case
- Instruction Manual
Features
- The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).
- The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring through paint and coatings in echo-echo mode.
- The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
- Built in hardware AGC gain control for through paint measurements in multi mode operation.
- The MVX has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
- CE Certified
- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
- Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
- MVX also comes complete with our Windows PC software for transferring data to and from a PC.
- Includes Flaw Inspection - Prove Up Mode, (special probe required)
- The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the tesst material, and display the minimum measurement scanned.
- Includes NIST-Traceable Calibration Certificate
Specifications
| Range in Steel* | Pulse-Echo Mode:Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches) Echo-Echo Mode:Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches). Range will vary +/- depending on the thickness of coating. |
| Resolution | .001 inches (0.01mm) |
| Velocity Range | .0492 to .3936 in./ms 1250 to 9999 meters/sec |
| Units | English & Metric |
| Measurement Modes | - Pulse-Echo (flaws, pits) - Echo-Echo (thru-paint) |
| Transducer Types | Dual Element (1 to 10 MHz). |
| Memory | 16 megabit non-volatile ram |
| Memory capacity | 12,000 pages with 1 reading and waveform per page |
| Power Source | Three 1.5V alkaline or 1.2V NiCad AA cells |
| Battery Life | Typically operates for 150 hours on alkaline and 100 hours on NiCad |
| Auto Power off | if idle 5 min |
| Display | 1/8 in. VGA grayscale display 62 x 45.7mm |
| Keyboard | Membrane switch with twelve tactile keys |
| Case | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). |
| Operating Temperature | -14 to 140F (-10 to 60C) |
| Weigth, net | 383 grams |
| Dimensions | 63.5 W x 165 H x 31.5 D mm |
| Warranty | 2 year limited |
| Certification | CE Approved, Factory calibration traceable to national standards |
Display Views
A-Scan Scan Mode
- The A-Scan rectified mode is the preferred display view for flaw and pit detection applications and measuring through paint and coatings in the echo-echo mode.
B-Scan Mode
- The B-Scan view displays a time-based cross section of the test material. It is commonly used to display the profile of the blind or underside of a pipe or tank.
Large Digits
- The Large Digits view provides a basic digital thickness gauge look and feel. The large display makes it easy for the operator to monitor the thickness readings.
Related Products
NIST-Traceable Steel Test Block
3 Sizes Available
- Precision Machined and Finished
- Includes NIST Report and Test Data
TICC-MVX
Protective Holder for Ultrasonic Gauges
- Constructed from heavy duty Cordura Nylon
- Built-in belt loop
Uncertified Steel Test Block
For Ultrasonic Gauges
For Ultrasonic Gauges
- For convenient confirmation of thickness gauge calibration
Downloads
 | Dakota Ultrasonics MX2-DL (MVX) Ultrasonic Thickness Gauge Z-149-0004 / Z-149-0006 with Enhanced Display - Instruction Manual |
| Dakota Ultrasonics Dual Element Corrosion Thickness Gauges - List |
